Serial connection between r2 and r1 is hdlc on the 141.108.1.0/24 network with RIP running on it for both r2 and r1. R1-->R3 and R1--> R4 are running OSPF in area 0. Generating the 141.108.3.0/24 from lo0 on r4 and 141.108.4.0/24 from r3.
r2 ---141.108.1.0/24 ---r1 ------ 141.108.255.0/30-----r3 \_______ 141.108.255.4/30 ---- r4 What i'm trying to do is get the 141.108.3.0/24 and 141.108.4.0/24 to show up on r2 as rip routes heard from r1. I'm redistributing ospf 1 into rip with a metric of 5. Since r1 is considered a border router because it's connected to another protcol I figured I could use the "summary-address 141.108.3.0 255.255.255.0" command to generate a summary address to r2. This did not work until a put a static route to null0 for that particular network and then it showed up. r2#r 141.108.0.0/24 is subnetted, 3 subnets C 141.108.1.0 is directly connected, Serial0 R 141.108.3.0 [120/1] via 141.108.1.4, 00:00:22, Serial0 R 141.108.4.0 [120/1] via 141.108.1.4, 00:00:22, Serial0 150.150.0.0/24 is subnetted, 1 subnets C 150.150.150.0 is directly connected, Loopback0 My understanding of the summary-address command is to normally take external routes and summarize them into OSPF but maybe I'm using it backwards in this case to solve the my issue. I would have also though that there would be the same /24 route installed in the rest of the OSPF routers but it is not there (atleast not as a /24) or in the ospf database. r4#r Gateway of last resort is not set 141.108.0.0/16 is variably subnetted, 5 subnets, 3 masks C 141.108.255.4/30 is directly connected, Serial0 O 141.108.255.0/30 [110/128] via 141.108.255.5, 00:09:10, Serial0 C 141.108.3.0/29 is directly connected, Loopback0 O 141.108.5.0/28 [110/129] via 141.108.255.5, 00:09:10, Serial0 O 141.108.4.0/28 [110/129] via 141.108.255.5, 00:09:10, Serial0 r4# I would have thought it would show up on R4 and R3 but only the /28's are. Below is the config of the router with the redistribution and the summary-addresses. Is there another way to do this with multiple ospf processes too or any other tricks you folks may know? r1#sr Building configuration... Current configuration : 2950 bytes ! version 12.2 no service single-slot-reload-enable service timestamps debug datetime localtime service timestamps log datetime localtime no service password-encryption ! hostname r1 ! logging rate-limit console 10 except errors enable secret 5 $1$eE3Z$08gdpU0xizpkuKkrvzmr0. ! clock timezone est -5 clock summer-time est recurring ip subnet-zero no ip finger ip tcp synwait-time 5 no ip domain-lookup ! no ip dhcp-client network-discovery frame-relay switching ! ! ! interface Loopback0 ip address 141.108.2.1 255.255.255.128 ip ospf network point-to-point ! interface Serial0 no ip address encapsulation frame-relay no fair-queue no frame-relay inverse-arp ! interface Serial0.1 point-to-point ip address 141.108.255.1 255.255.255.252 ip ospf network non-broadcast frame-relay interface-dlci 103 ! interface Serial0.2 point-to-point ip address 141.108.255.5 255.255.255.252 ip ospf network non-broadcast frame-relay interface-dlci 104 ! interface Serial1 no ip address shutdown ! interface Serial2 no ip address encapsulation frame-relay clockrate 64000 frame-relay intf-type dce frame-relay route 103 interface Serial4 301 frame-relay route 104 interface Serial5 401 ! interface Serial3 no ip address shutdown ! interface Serial4 no ip address encapsulation frame-relay clockrate 64000 frame-relay intf-type dce frame-relay route 301 interface Serial2 103 ! interface Serial5 no ip address encapsulation frame-relay clockrate 64000 frame-relay intf-type dce frame-relay route 401 interface Serial2 104 ! interface Serial6 no ip address shutdown ! interface Serial7 no ip address shutdown ! interface Serial8 no ip address shutdown ! interface Serial9 ip address 141.108.1.4 255.255.255.0 clockrate 64000 ! interface TokenRing0 no ip address shutdown ! interface BRI0 no ip address shutdown cdapi buffers regular 0 cdapi buffers raw 0 cdapi buffers large 0 ! router ospf 1 router-id 141.108.255.5 log-adjacency-changes summary-address 141.108.3.0 255.255.255.0 summary-address 141.108.4.0 255.255.255.0 passive-interface Loopback0 network 141.108.255.1 0.0.0.0 area 0 network 141.108.255.5 0.0.0.0 area 0 neighbor 141.108.255.6 priority 1 neighbor 141.108.255.2 priority 1 ! router rip redistribute ospf 1 metric 2 network 141.108.0.0 ! ip kerberos source-interface any ip classless ip route 141.108.3.0 255.255.255.0 Null0 ip route 141.108.4.0 255.255.255.0 Null0 ip http server ! alias exec ib sh ip int brief alias exec c config terminal alias exec sr sh run alias exec r sh ip route alias exec bs sh ip bgp summary alias exec b sh ip bgp alias exec cb clear ip bgp * alias exec on sh ip ospf neigh ! l end r1# Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=49107&t=49107 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]