Definitively, around 26Kfor a G729 bidirectional call without header compression.
----- Original Message ----- From: "Steven A. Ridder" To: Sent: Monday, July 22, 2002 11:48 PM Subject: Re: VoIP Bandwidth Calculation you wil have to consider two [7:49383] > I'm not sure the context the document was written in, but it's only 24K > (give or take depending on the L2 encap) that you need to plan for. > > Steve > > > ""neil K."" wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > Hi All, > > > > Using the standard formulas, I see for a bandwidth required for a g.729 > call > > is 24kbps without RTP compression.I used to do the same when using other > > codecs. > > Recently I came across some VoIP documentation which said that you will > have > > to consider two RTP flows to simulate a call, and hence the requirement > for > > Bandwidth doubles.say g729 24 kbps becomes almost 48kbps if u consider two > > RTP flows. > > > > Any help will be highly appreciated. > > > > Thanks, > > > > Neil Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=49399&t=49399 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]