I was under the impression that the PDM command is just a pain in the arse cosmetic addition for use only within PDM. I'm fairly certain it's nothing to do with access to PDM itself. I'll try deleting them next time I get chance and see what effect it has on PDM, and if PDM automatically puts them back (in the same way that it automatically put them there in the first place)
As always...let me know if I'm talking rubbish. Gaz ""Mark W. Odette II"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > I believe the answer is yes. > > The HTTP command specifies what node is allowed to hit the HTTP Server, > while the PDM command defines the host allowed to log into the PDM App. > > I'm sure someone will rightly correct me if I'm wrong. :) > > -Mark > > -----Original Message----- > From: John Green [mailto:[EMAIL PROTECTED]] > Sent: Tuesday, July 23, 2002 11:35 AM > To: [EMAIL PROTECTED] > Subject: pix quick help [7:49450] > > to allow a workstation access so as to be able to use > and configure via the PDM, we give the command > http server enable > http 165.12.55.12 255.255.255.255 inside > > what is the purpose for the command > pdm location 165.12.55.12 255.255.255.255 inside > > do we need both the commands to allow the workstation > be able to access PDM GUI ?? > > > __________________________________________________ > Do You Yahoo!? > Yahoo! Health - Feel better, live better > http://health.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=49478&t=49450 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
