Possibly a SPID issue.  Do a "show isdn status" and see if the spids are
valid.  Assuming you replaced the number listed in the debug.  You may also
want to try "debug isdn q921"--it will most likely give you a more definite
direction to go in.

These isdn issues are sometimes tricky.  I have seen cards not work that are
fixed with a simple reload of the router.

HTH,
Scott

""Paul""  wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi all ....
>
>     I can't connect to another router over ISDN using BRI1 ... the
following
> is from a 'debug isdn events' I don't understand the 'Call was hung up'
part
> ??? Hopefully this means that my end is Ok .. and the other end has an
issue
> that needs to be resolved ...
>
>  Can anyone please enlighten me :)
>
> Kind regards
>
> Paul ...
>
> C4500-1#ping 10.209.31.1
>
> Type escape sequence to abort.
> Sending 5, 100-byte ICMP Echos to 10.209.31.1, timeout is 2 seconds:
>
> ISDN BR0: Outgoing call id = 0x8FD2
> ISDN BR1: Event: Call to 0123456789 at 64 Kb/s
> ISDN BR1: received HOST_INFORMATION.
> ISDN Event: B channel assigned by switch
> ISDN BR1: received HOST_DISCONNECT
> ISDN BR1: Event:  Call to 0123456789 was hung up..
> ISDN BR0: Outgoing call id = 0x8FD3
> ISDN BR1: Event: Call to 0123456789 at 64 Kb/s
> ISDN BR1: received HOST_INFORMATION.
> ISDN Event: B channel assigned by switch
> ISDN BR1: received HOST_DISCONNECT
> ISDN BR1: Event:  Call to 0123456789 was hung up..
> ISDN BR0: Outgoing call id = 0x8FD4
> ISDN BR1: Event: Call to 0123456789 at 64 Kb/s
> ISDN BR1: received HOST_INFORMATION.
> Success rate is 0 percent (0/5)
> C4500-1#
> ISDN Event: B channel assigned by switch
> ISDN BR1: received HOST_DISCONNECT
> ISDN BR1: Event:  Call to 0123456789 was hung up.
> C4500-1#
> C4500-1#




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=49554&t=49548
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to