Okay, I was able to make my ATM configuration work, but I had to map IDENTICAL vpi/vci numbers on each router end. For example, on the L1010, from interface atm12/0/0, I had to input "atm pvc 5 200 int a12/0/2 5 200". Then on the routers, I had to configure the same pvc numbers. This way, I was able to ping each end. Now, I'm wondering why I had to do this. Can't I configure a different vci value? My stick network drawing is as follows: R1----atm----L1010----atm----R2 Again, I was able to make it work, but I'm wondering why I can't vary the vci values on each router. Anyone have any ideas? Thanks, Eddie
-----Original Message----- From: Edward Sohn [mailto:[EMAIL PROTECTED]] Sent: Wednesday, July 24, 2002 9:17 PM To: '[EMAIL PROTECTED]' Subject: Anybody seen this error before re: ATM? In my steps to troubleshooting, I'm getting the following error on my L1010 when performing a "debug atm packet" ATM12/0/2(O): VCD:0x22 DM:0x100Inactive or not configured VCD Length:0x41 0100 0404 494C 4D49 A030 0202 292F 0201 0002 0100 3024 3011 060D 2B06 0104 0182 6102 0101 0107 0005 0030 0F06 0B2B 0601 0401 8261 0201 0200 0500 ATM12/0/2(O): VCD:0x22 DM:0x100Inactive or not configured VCD Length:0x30 0100 0404 494C 4D49 A01F 0202 2930 0201 0002 0100 3013 3011 060D 2B06 0104 0182 6102 0201 010A 0005 0030 ATM12/0/2(O): VCD:0x22 DM:0x100Inactive or not configured VCD Length:0x30 0100 0404 494C 4D49 A01F 0202 2931 0201 0002 0100 3013 3011 060D 2B06 0104 0182 6102 0201 0108 0005 0000 ATM12/0/2(O): VCD:0x22 DM:0x100Inactive or not configured VCD Length:0x41 0100 0404 494C 4D49 A030 0202 2932 0201 0002 0100 3024 3011 060D 2B06 0104 0182 6102 0101 0107 0005 0030 0F06 0B2B 0601 0401 8261 0201 0200 0500 Any help would be greatly appreciated! Thanks, Eddie [GroupStudy.com removed an attachment of type image/jpeg which had a name of Notebook.jpg] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=49614&t=49614 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
