Theoretically yes. But the ip is reserved and nearly ever changes..
>From: "Jake" >Reply-To: "Jake" >To: [EMAIL PROTECTED] >Subject: Re: Can get it to work (Pix 515 behind cable modem [7:49744] >Date: Fri, 26 Jul 2002 15:44:35 GMT > >Is the outside interface doing DHCP from the ISP with the setroute command. >If so, this would mean that your global ip on your outside interface >changes. Am I correct to assume this?? > >"Kevin O'Gilvie" wrote in message >news:[EMAIL PROTECTED]... > > Dear All, > > > > Below is my config. > > Can someone tell me why ckients on the inside interface cant get to the > > internet (browwse, ping, nothing) > > Yet show xlate shows clients Pat(ing) to outside address.. > > I am so frustrated, dont know whats the issue???!!! > > > > PIX Version 6.2(2) > > nameif ethernet0 outside security0 > > nameif ethernet1 inside security100 > > nameif ethernet2 dmz security50 > > enable password 8Ry2YjIyt7RRXU24 encrypted > > passwd 2KFQnbNIdI.2KYOU encrypted > > hostname pixfirewall > > fixup protocol ftp 21 > > fixup protocol http 80 > > fixup protocol h323 h225 1720 > > fixup protocol h323 ras 1718-1719 > > fixup protocol ils 389 > > fixup protocol rsh 514 > > fixup protocol rtsp 554 > > fixup protocol sqlnet 1521 > > fixup protocol sip 5060 > > fixup protocol skinny 2000 > > no fixup protocol smtp 25 > > names > > pager lines 24 > > logging on > > logging trap debugging > > logging host inside 192.168.0.2 > > interface ethernet0 100full > > interface ethernet1 100full > > interface ethernet2 100full > > mtu outside 1500 > > mtu inside 1500 > > mtu dmz 1500 > > ip address outside dhcp setroute > > ip address inside 192.168.0.1 255.255.255.0 > > ip address dmz 127.0.0.1 255.255.255.255 > > ip audit info action alarm > > ip audit attack action alarm > > pdm history enable > > arp timeout 14400 > > global (outside) 1 interface > > nat (inside) 1 0.0.0.0 0.0.0.0 0 0 > > timeout xlate 0:30:00 > > timeout conn 0:15:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h323 > > 0:05:00 si > > p 0:30:00 sip_media 0:02:00 > > timeout uauth 0:05:00 absolute > > aaa-server TACACS+ protocol tacacs+ > > aaa-server RADIUS protocol radius > > aaa-server LOCAL protocol local > > no snmp-server location > > no snmp-server contact > > snmp-server community public > > no snmp-server enable traps > > floodguard enable > > sysopt connection permit-ipsec > > sysopt connection permit-pptp > > no sysopt route dnat > > telnet 192.168.0.2 255.255.255.255 inside > > telnet timeout 60 > > ssh timeout 5 > > dhcpd auto_config outside > > terminal width 80 > > Cryptochecksum:0d7e04757f9b50f2a77acb163265e3ea > > : end > > [OK] > > > > _________________________________________________________________ > > Send and receive Hotmail on your mobile device: http://mobile.msn.com _________________________________________________________________ Send and receive Hotmail on your mobile device: http://mobile.msn.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=49787&t=49744 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]