just to be a know-it-all, there is no Sc0 interface on the 2950 or 3550 series that I can determine. near as I can tell, you put the ip either on a loopback interface or on the management vlan, whatever that may be.
which is all fine with me. I never did get that Sc0 idea anyway :-> ""Larry Letterman"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > I dont see what assigning an IP to the vty lines has to do with > ability to ping the switches management interface on vlan 1. The vty > lines should respond to the telnet request on the SC0 interfaces ip > address... > > > Larry Letterman > Cisco Systems > [EMAIL PROTECTED] > > > > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of > Tribavan Raina > Sent: Wednesday, July 31, 2002 8:28 PM > To: [EMAIL PROTECTED] > Subject: RE: Cat2950 VLAN 1 ip address...can't connect [7:50331] > > > Well I think you have not assigned any ip address to your vty lines > also.That could be one of the reasons apart from different Vlans. > > > Cheers > Tribavan Raina > Network Consultant > > TechTonics Group Limited > Level 31 Grand Plimmer Tower > 2-6 Gilmer Terrace > PO Box 11 199 > Wellington > > Ph: +64 4 385 2628 > Fax: +64 4 385 2400 > > www.techtonics.co.nz > > > -----Original Message----- > From: Daniel Cotts [mailto:[EMAIL PROTECTED]] > Sent: Thursday, August 01, 2002 12:49 PM > To: [EMAIL PROTECTED] > Subject: RE: Cat2950 VLAN 1 ip address...can't connect [7:50331] > > > The switch is in VLAN 1 while all the ports are in VLAN 100. You did not > specify from where you were attempting to ping. I see no trunking ports that > would connect both VLANs to a box with a routing function. Adding that is > one solution. > Or consider changing the management VLAN to 100. (Arguments pro and con) > depends on what the rest of your network looks like. > > > > -----Original Message----- > > From: Dain Deutschman [mailto:[EMAIL PROTECTED]] > > Sent: Wednesday, July 31, 2002 7:11 PM > > To: [EMAIL PROTECTED] > > Subject: Cat2950 VLAN 1 ip address...can't connect [7:50331] > > > > > > Any ideas why I cannot ping or otherwise connect to > > 192.168.0.8/24..the IP > > address of this Cat2950 Switch?? > > I can ping other devices on the network. Thanks for any input. > > > > ! > > version 12.1 > > service config > > no service pad > > service timestamps debug uptime > > service timestamps log uptime > > service password-encryption > > ! > > hostname UPIJAK > > ! > > no logging console > > ! > > ip subnet-zero > > no ip finger > > no ip domain-lookup > > ! > > ! > > ! > > interface FastEthernet0/1 > > switchport access vlan 100 > > > > interface FastEthernet0/2 > > switchport access vlan 100 > > ! > > interface FastEthernet0/3 > > switchport access vlan 100 > > ! > > interface FastEthernet0/4 > > switchport access vlan 100 > > ! > > interface FastEthernet0/5 > > switchport access vlan 100 > > ! > > interface FastEthernet0/6 > > switchport access vlan 100 > > ! > > interface FastEthernet0/7 > > switchport access vlan 100 > > ! > > interface FastEthernet0/8 > > switchport access vlan 100 > > ! > > interface FastEthernet0/9 > > switchport access vlan 100 > > ! > > interface FastEthernet0/10 > > switchport access vlan 100 > > ! > > interface FastEthernet0/11 > > switchport access vlan 100 > > ! > > interface FastEthernet0/12 > > switchport access vlan 100 > > ! > > interface FastEthernet0/13 > > switchport access vlan 100 > > ! > > interface FastEthernet0/14 > > switchport access vlan 100 > > ! > > interface FastEthernet0/15 > > switchport access vlan 100 > > ! > > interface FastEthernet0/16 > > switchport access vlan 100 > > ! > > interface FastEthernet0/17 > > switchport access vlan 100 > > ! > > interface FastEthernet0/18 > > switchport access vlan 100 > > ! > > interface FastEthernet0/19 > > switchport access vlan 100 > > ! > > interface FastEthernet0/20 > > switchport access vlan 100 > > ! > > interface FastEthernet0/21 > > switchport access vlan 100 > > ! > > interface FastEthernet0/22 > > switchport access vlan 100 > > ! > > interface FastEthernet0/23 > > switchport access vlan 100 > > duplex half > > speed 10 > > ! > > interface FastEthernet0/24 > > switchport access vlan 100 > > duplex full > > speed 100 > > ! > > interface Vlan1 > > ip address 192.168.0.8 255.255.255.0 > > no ip route-cache > > ! > > no ip http server > > ! > > line con 0 > > exec-timeout 240 0 > > transport input none > > line vty 0 4 > > line vty 5 15 > > login > > ! > > end > > > > > > -- > > Dain Deutschman > > CNA, MCP, CCNA > > Data Communications Manager > > New Star Sales and Service, Inc. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=50360&t=50331 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
