All, I have just got my pix 501 and I have it connected to my dsl provider I have a static ip address. I have it configured as best as I could from the docs but can't get traffic through it. Also I can ping my default gateway of my isp but when I try to ping anything outside of my isp default gateway like www.cisco.com by name or ip address I get no response. And my clients on the inside can't get out. Any help would be greatly appreciated.
pixfirewall# sh conf : Saved : PIX Version 6.1(3) nameif ethernet0 outside security0 nameif ethernet1 inside security100 enable password xzodKzXOwh/IjrTt encrypted passwd 2KFQnbNIdI.2KYOU encrypted hostname pixfirewall fixup protocol ftp 21 fixup protocol http 80 fixup protocol h323 1720 fixup protocol rsh 514 fixup protocol rtsp 554 fixup protocol smtp 25 fixup protocol sqlnet 1521 fixup protocol sip 5060 fixup protocol skinny 2000 names pager lines 24 interface ethernet0 10baset interface ethernet1 10full mtu outside 1500 mtu inside 1500 ip address outside 66.93.21.X 255.255.255.0 ip address inside 192.168.X.X 255.255.255.0 ip audit info action alarm ip audit attack action alarm pdm location 66.93.21.0 255.255.255.0 outside pdm location 0.0.0.0 255.255.255.0 outside pdm logging informational 100 pdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 1 0.0.0.0 0.0.0.0 0 0 timeout xlate 0:05:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h323 0:05:00 si p 0:30:00 sip_media 0:02:00 timeout uauth 0:05:00 absolute aaa-server TACACS+ protocol tacacs+ aaa-server RADIUS protocol radius http server enable http 192.168.X.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server community public no snmp-server enable traps floodguard enable no sysopt route dnat telnet timeout 5 ssh timeout 5 dhcpd dns 192.168.X.X dhcpd wins 192.168.X.X dhcpd lease 3600 dhcpd ping_timeout 750 dhcpd domain digitalrage.org terminal width 80 Cryptochecksum:b8fe98213b66bb850c58ba5ad7831262 pixfirewall# sh ver Cisco PIX Firewall Version 6.1(3) Cisco PIX Device Manager Version 1.1(2) Compiled on Fri 22-Feb-02 08:15 by morlee pixfirewall up 17 mins 46 secs Hardware: PIX-501, 16 MB RAM, CPU Am5x86 133 MHz Flash E28F640J3 @ 0x3000000, 8MB BIOS Flash E28F640J3 @ 0xfffd8000, 128KB 0: ethernet0: address is 000a.411e.f554, irq 9 1: ethernet1: address is 000a.411e.f555, irq 10 Licensed Features: Failover: Disabled VPN-DES: Enabled VPN-3DES: Disabled Maximum Interfaces: 2 Cut-through Proxy: Enabled Guards: Enabled Websense: Enabled Inside Hosts: 10 Throughput: Limited ISAKMP peers: 5 pixfirewall# Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=50449&t=50449 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]