If you have only one public ip address and it is used on the outside interface: static (inside,outside) tcp interface 25 inside_ip 25 netmask 255.255.255.255 conduit permit tcp host outside_ip eq 25 any
-- Lidiya White -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Elijah Savage III Sent: Thursday, August 01, 2002 10:23 PM To: [EMAIL PROTECTED] Subject: Pix static mappings to the inside [7:50500] I have my pix 501 firewall working but I have yet to be able to get static mapping working. I try this Static "outside ip address" "inside ip address" Conduit permit tcp outside ip inside ip eq 25 any When I issue these commands I can get mail into my mail server behind the pix but it breaks my nat. I have read that it is not good to use your outside global ip address for static mapping but if you only have 1 static ip address how else can you do it. With me only having one static ip will this work? Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=50514&t=50500 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
