Actually it says you've got 8MB of flash and 4MB of RAM. The 2500 series is one of the routers that has a single pool of RAM that gets split at boot time into Processor memory and I/O memory. On these platforms, you add up the two numbers to get the total RAM.
A few models (particularly the AS5xxx series and XL switches) have separate memory chips for I/O (packet) memory. On these, only the first number counts towards IOS requirements. Thanks, Shawn "Robert D. Cluett" wrote: > > All, am I reading this right? Does this state that there is 8MB Flash and > 2MB of DRAM? If so, what do I need to do to get it to the latest version of > IOS that Cisco uses for the tests? Help would be more than appreciated! > > cisco 2500 (68030) processor (revision L) with 2048K/2048K bytes of memory. > Processor board ID 06992214, with hardware revision 00000000 > Bridging software. > X.25 software, Version 2.0, NET2, BFE and GOSIP compliant. > 1 Token Ring/IEEE 802.5 interface(s) > 2 Serial network interface(s) > 32K bytes of non-volatile configuration memory. > 8192K bytes of processor board System flash (Read ONLY) Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=51398&t=51387 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
