Yeah, thankx ... I want to move to dynamic routing ... I was just wondering what your experiences were ... and if there were any pitfalls I should avoid !!!! and if you guy's think that RIPv2 will do the job fine !!!! Im not particularly experienced ... hence my caution !!!
Cheers ... Paul ... ----- Original Message ----- From: "Chuck's Long Road" To: Sent: Sunday, August 18, 2002 10:10 PM Subject: Re: static routing [7:51599] > other than the fact that dynamic routing is kewl, why do you think you need > it? > > I doubt that Cisco is going to drop EIGRP any time soon. My understanding is > that Cisco is not supporting IS-IS on any of the lower end switches, but > that's a different story. > > > ""Paul"" wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > Hi guys, > > > > I have recently inherited a 30+ strong network that only uses static > > routing!!! Some of the equipment includes 2900s 3500s 3600s 4000s amongst > > others. I would very much like to move towards dynamic routing!!! What > would > > you guys suggest? I also believe that the next IOS for the 4006s does not > > support EIGRP !!!!! (If i am correct!) > > > > I am not sure if I should use RIP IGRP etc. Have any of you guys > experienced > > this before and what would you suggest? > > > > Kind regards > > > > Paul Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=51601&t=51599 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
