I configured the following on the NAS and it then automaically worked.

aaa authentication login default local
aaa authentication login NO_AUTHEN none
aaa authentication ppp default local
aaa authorization network default local none
aaa session-id common


>From: "Claudia Walter" 
>To: "Shane Stockman" 
>Subject: RE: ISDN Help needed [7:51634]
>Date: Mon, 19 Aug 2002 13:52:07 +0100
>
>Hi Shane,
>
>mmmh, on one side you have configured the username and password under the
>global config...
>
>on ZA108005D you have done it ok:
>
>username FD_PMBURG password 0 bmw2002
>
>but on FD_PMBURG you have done it under the dialer ...
>
>ppp authentication chap callin
>ppp chap hostname FD_PMBURG
>ppp chap password 0 bmw2002
>
>As far as I understand that should work but maybe just for testing you
>should try to configure the user name there as well in the global config?
>
>This could be very well a software issue...
>
>NB: Please keep on sending your reply to the alias that the others can also
>benefit from this discussion.
>
>A good page on CCO about ISDN trouble-shooting is here...
>
>http://www.cisco.com/warp/public/779/smbiz/service/troubleshooting/ts_isdn.h
>tm
>
>Cheers,
>
>Claudia
>
>
>
>-----Original Message-----
>From: Shane Stockman [mailto:[EMAIL PROTECTED]]
>Sent: 19 August 2002 12:29
>To: [EMAIL PROTECTED]
>Subject: RE: ISDN Help needed [7:51634]
>
>
>Here is the NAS config - interface dialer 3
>
>version 12.2
>service timestamps debug datetime msec localtime
>service timestamps log datetime msec localtime
>no service password-encryption
>!
>hostname ZA108005D
>!
>logging buffered 32768 debugging
>no logging console
>enable password St1tch_12
>!
>
>username FD_PMBURG password 0 bmw2002
>memory-size iomem 10
>clock timezone za 2
>modem country mica south-africa
>ip subnet-zero
>!
>!
>no ip domain-lookup
>ip host FD_PMBURG 172.20.169.2
>!
>isdn switch-type primary-net5
>chat-script callback ABORT ERROR ABORT BUSY "" "ATDT \T" TIMEOUT 60 CONNECT
>\C
>chat-script offhook "" "ATH1" OK
>!
>!
>!
>!
>!
>!
>!
>fax interface-type fax-mail
>mta receive maximum-recipients 0
>!
>controller E1 2/0
>pri-group timeslots 1-31
>!
>controller E1 2/1
>pri-group timeslots 1-31
>!
>!
>!
>!
>interface Loopback1
>ip address 172.20.60.1 255.255.255.0
>!
>interface FastEthernet0/0
>speed 100
>full-duplex
>!
>interface FastEthernet0/1
>description
>ip address
>speed 100
>full-duplex
>standby 109 ip
>!
>interface FastEthernet2/0
>no ip address
>shutdown
>duplex auto
>speed auto
>!
>interface Serial2/0:15
>no ip address
>encapsulation ppp
>no logging event link-status
>dialer pool-member 1
>isdn switch-type primary-net5
>isdn incoming-voice modem
>no fair-queue
>ppp authentication pap chap
>!
>interface Serial2/1:15
>no ip address
>encapsulation ppp
>no logging event link-status
>dialer pool-member 1
>isdn switch-type primary-net5
>isdn incoming-voice modem
>no fair-queue
>ppp authentication pap chap
>!
>
>interface Group-Async1
>ip unnumbered FastEthernet0/1
>encapsulation ppp
>dialer in-band
>dialer idle-timeout 1800
>dialer-group 1
>autodetect encapsulation ppp
>async mode interactive
>peer default ip address pool PRI
>ppp callback permit
>ppp authentication chap pap
>group-range 97 126
>!
>interface Dialer3
>bandwidth 64
>ip address 172.20.61.13 255.255.255.252
>ip broadcast-address 172.20.61.15
>encapsulation ppp
>no ip route-cache
>no ip mroute-cache
>dialer pool 1
>dialer remote-name FD_PMBURG
>dialer idle-timeout 180
>dialer-group 1
>ppp authentication pap chap
>ppp chap hostname ZA108005D
>ppp chap password 0 bmw2002
>ppp multilink
>multilink max-links 2
>multilink load-threshold 180 either
>!
>router eigrp 328
>redistribute static
>network 172.20.0.0
>no auto-summary
>no eigrp log-neighbor-changes
>!
>ip classless
>ip http server
>ip pim bidir-enable
>!
>!
>access-list 101 deny   udp any any eq netbios-ns
>access-list 101 deny   udp any any eq netbios-dgm
>access-list 101 deny   udp any any eq 135
>access-list 101 deny   udp any any eq ntp
>access-list 101 deny   eigrp any any
>access-list 101 deny   udp any any eq rip
>access-list 101 permit ip any any log
>dialer-list 1 protocol ip list 101
>dialer-list 1 protocol ipx deny
>!
>snmp-server community ECOM RW
>snmp-server community FERNS RO
>call rsvp-sync
>!
>!
>mgcp profile default
>!
>dial-peer cor custom
>!
>!
>!
>!
>line con 0
>line 33 62
>script modem-off-hook offhook
>script callback callback
>modem InOut
>modem autoconfigure discovery
>transport input all
>autoselect during-login
>autoselect ppp
>flowcontrol hardware
>line 97 126
>script modem-off-hook offhook
>script callback callback
>modem InOut
>modem autoconfigure discovery
>transport input all
>autoselect during-login
>autoselect ppp
>flowcontrol hardware
>line aux 0
>line vty 0 4
>password tpop
>login
>!
>ntp clock-period 17179951
>ntp server 172.20.108.5
>time-range Business
>periodic weekdays 8:00 to 17:00
>!
>!
>end
>
>ZA108005D# sh ver
>Cisco Internetwork Operating System Software
>IOS (tm) 3600 Software (C3640-IS-M), Version 12.2(8)T4,  RELEASE SOFTWARE
>(fc1)
>TAC Support: http://www.cisco.com/tac
>Copyright (c) 1986-2002 by cisco Systems, Inc.
>Compiled Fri 03-May-02 16:58 by ccai
>Image text-base: 0x60008930, data-base: 0x61558000
>
>ROM: System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE
>SOFTWARE (f
>c1)
>
>ZA108005D uptime is 2 days, 21 hours, 58 minutes
>System returned to ROM by reload at 15:24:04 za Fri Aug 16 2002
>System image file is "flash:c3640-is-mz.122-8.T4.bin"
>
>cisco 3640 (R4700) processor (revision 0x00) with 89088K/9216K bytes of
>memory.
>Processor board ID 27631617
>R4700 CPU at 100Mhz, Implementation 33, Rev 1.0
>MICA-6DM Firmware: CP ver 2730 - 5/23/2001, SP ver 2730 - 5/23/2001.
>Channelized E1, Version 1.0.
>Bridging software.
>X.25 software, Version 3.0.0.
>SuperLAT software (copyright 1990 by Meridian Technology Corp).
>Primary Rate ISDN software, Version 1.1.
>3 FastEthernet/IEEE 802.3 interface(s)
>62 Serial network interface(s)
>60 terminal line(s)
>2 Channelized E1/PRI port(s)
>DRAM configuration is 64 bits wide with parity disabled.
>125K bytes of non-volatile configuration memory.
>32768K bytes of processor board System flash (Read/Write)
>
>Configuration register is 0x2102
>
>++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>
>Dial router config
>version 12.2
>service timestamps debug uptime
>service timestamps log uptime
>no service password-encryption
>!
>hostname FD_PMBURG
>!
>!
>username maintenance password 0 pablo
>ip subnet-zero
>!
>!
>!
>isdn switch-type basic-net3
>!
>!
>!
>interface BRI0
>no ip address
>encapsulation ppp
>dialer pool-member 1
>isdn switch-type basic-net3
>no fair-queue
>ppp authentication pap chap
>!
>interface FastEthernet0
>no ip address
>shutdown
>speed auto
>!
>interface Serial0
>no ip address
>shutdown
>no fair-queue
>!
>interface Dialer0
>description link to midrand
>ip address 172.20.61.14 255.255.255.252
>ip broadcast-address 172.20.61.15
>encapsulation ppp
>no ip mroute-cache
>dialer pool 1
>dialer remote-name ZA108005D
>dialer idle-timeout 180
>dialer string 0116547600
>dialer load-threshold 180 either
>dialer-group 1
>ppp authentication chap callin
>ppp chap hostname FD_PMBURG
>ppp chap password 0 bmw2002
>!
>ip classless
>ip route 0.0.0.0 0.0.0.0 172.20.61.13 200
>no ip http server
>ip pim bidir-enable
>!
>!
>access-list 101 deny   udp any any eq netbios-ns
>access-list 101 deny   udp any any eq netbios-dgm
>access-list 101 deny   udp any any eq 135
>access-list 101 deny   udp any any eq ntp
>access-list 101 deny   udp any any eq rip
>access-list 101 deny   eigrp any any
>access-list 101 permit ip any any
>dialer-list 1 protocol ip list 101
>!
>!
>line con 0
>line aux 0
>line vty 0 4
>!
>no scheduler allocate
>end
>
>FD_PMBURG#
>
>
>
>
>
>
>_________________________________________________________________
>Send and receive Hotmail on your mobile device: http://mobile.msn.com




_________________________________________________________________
Chat with friends online, try MSN Messenger: http://messenger.msn.com




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=51642&t=51634
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to