You have to open IP protocols 50 and 51, and also udp port 500. Josh
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Juan Blanco Sent: Tuesday, August 20, 2002 8:13 AM To: [EMAIL PROTECTED] Subject: RE: IPSEC Ports [7:51732] Yes, You need to make sure that port 50, 51 and udp 500 are open in the two ends-points JB -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Leonardo Borda Sent: Tuesday, August 20, 2002 8:20 AM To: [EMAIL PROTECTED] Subject: IPSEC Ports [7:51732] Does anyone know what are the ports to enable IPSEC traffic between two points when I have configured access-lists on the interfaces? I am getting that problem and I have found just few documents about it. I know that I have to permit IP, UDP and TCP. Is there other protocols to permit? Please any help will be appreciated. Borda. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=51742&t=51732 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]