We had the same problem last month on an old 4000. The solution, from memory, was to use the config register or boot system command in the conf t global mode. I remember we did o/r 0x2102 and the next boot showed the config reg at 0x2102, but it was still in rxboot mode. I think the next step was within the configuration.
Memory a bit rusty - but it may help trigger some ideas. Rik -----Original Message----- From: McHugh Randy [mailto:[EMAIL PROTECTED]] Sent: Wednesday, 21 August 2002 4:08 AM To: [EMAIL PROTECTED] Subject: Stuck in rxboot mode on 2524 [7:51780] I just attempted an upgrade on a 2524 from 11.0 to 12.2 and am now stuck rxboot mode. I followed the instruction to the letter and rebooted from 0x2101 to 0x2102 and the config register is showing that is is now 0x2102 but it is still in rxboot mode. My upgrade of the IOS failed also. At the end I got a checksum error. Right now I just want to get back in regular boot mode. Any suggestions appreciated. thx Randy Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=51819&t=51780 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
