Dear Elmer, No , If you want to monitor ISIS adjacencies, use this command :
SHOW CLNS neighbor or SHOW CLNS NEIGHBOR DETAILED The host ID is SNPA and the traffic is classified with L1L2 or L2L2. The command may be used only in the router connected in the same ethernet of the clns traffic than you monitor. Best Regards, Armando Santana -----Original Message----- From: cebuano To: [EMAIL PROTECTED] Sent: 22/08/02 00:42 Subject: IS-IS System ID [7:51878] Hi Group, Has the 12.0 "modified" the output of the System ID to show the hostname instead of the actual 3-octet Hex? Here's a sample of what I see in 12.2. erlin#sh clns is System Id Interface State Type Priority Circuit Id Format Rome Se4 Up L1L2 0 /0 00 Phase V Paris Et0 Up L1L2 64/64 Paris.01 Phase V Amsterdam#sh is data IS-IS Level-1 Link State Database: LSPID LSP Seq Num LSP Checksum LSP Holdtime ATT/P/OL Amsterdam.00-00 * 0x00000003 0xCD75 647 1/0/0 Amsterdam.03-00 * 0x00000001 0x75D5 0 (632) 0/0/0 Brussels.00-00 0x00000004 0x6B9D 639 1/0/0 Brussels.01-00 0x00000001 0x8B68 631 0/0/0 IS-IS Level-2 Link State Database: LSPID LSP Seq Num LSP Checksum LSP Holdtime ATT/P/OL Amsterdam.00-00 * 0x00000002 0x3913 633 0/0/0 Rome.00-00 0x00000002 0x1196 617 0/0/0 Rome.01-00 0x00000002 0x2D62 628 0/0/0 London.00-00 0x00000005 0x9EA1 631 0/0/0 Brussels.00-00 0x00000003 0xCFB3 624 0/0/0 Brussels.01-00 0x00000002 0x1962 634 0/0/0 Paris.00-00 0x0000000C 0x8D31 575 0/0/0 Paris.01-00 0x00000003 0x6215 1189 0/0/0 Berlin.00-00 0x0000000E 0x1967 623 0/0/0 TIA, Elmer Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=51896&t=51878 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
