Yes it is still L3,L4 switching as long as you have the MSFC you will have no problem. You have to enable MLS on the Sup Engine as well to have this work.
Sean Wolfe wrote: > > Hey folks, 6000 and 6500 switches are IOS based and do MLS, > right? Cisco's website says so, but they they say something > confusing on their Configuring IP MLS webpage under "hardware > requirements": > > http://www.cisco.com/univercd/cc/td/doc/product/lan/cat5000/rel_5_2/layer3/mls.htm > > and make it sound like only the 2926G and 5000/5500 series do > MLS. > > Is there something significantly different about how the 6x00 > series handles MLS? Evidently they use a different software, > and different routing hardware, MSFC and PFC instead of the > 5x00 NFFC. But it's still L3/L4 switching/MLS, right? > > Hmmm. . . your experience with these products is appreciated. > > Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=51902&t=51871 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
