It depends on the version. Some has it as the default others don't. "sh ip int" as u said can verify it's status regardless of the default of the IOS
>From: "Tunji Suleiman" > >Directed broadcast forwarding is disabled by default, so you wont >see no ip directed broadcast in the config. If you enter ip directed >broadcast command however, it shows in ur config. > >You can verify with sh ip int > >Regards > > >>From: "YASSER ALY" >>Reply-To: "YASSER ALY" >>To: [EMAIL PROTECTED] >>Subject: Blocking directed broadcast [7:52205] >>Date: Wed, 28 Aug 2002 09:32:40 GMT >> >>Hi All, Is there a way to verify that " no ip directed-broadcast " >>is >>enabled on an interface.I was trying to enable it on a router but >>typing >>the command and then doing sh run nothing appears, trying to type >>the >>command without no at the begining it shows in the sh run which >>gives the >>impression that " no ip directed-broadcast " is the default for >>this >>version. Any ideas to verify that it is really working and >>blocking the >>directed-broadcasts ? Regards,Yasser >> >>------------------------------------------------------------------------ >> >>Send and receive Hotmail on your mobile device: Click Here >> >> >> archives, and subscription info: >>http://www.groupstudy.com/list/cisco.html >>Report misconduct and Nondisclosure violations to >>[EMAIL PROTECTED] > > > ------------------------------------------------------------------------ Chat with friends online, try MSN Messenger: Click Here Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=52212&t=52205 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]