Can anyone relate any pro/con's of creating a PPTP VPN Tunnel through a Pix 515? I asked the TAC about this and below are the 3 commands they say I need. It would be point-to-point via IP address from inside to a location on the internet. I'm a little leary of using a Non-Cisco VPN on the PIX.
static (inside,outside) x.x.x.x y.y.y.y netmask 255.255.255.255 conduit permit gre host x.x.x.x host z.z.z.z conduit permit tcp host x.x.x.x 1723 host z.z.z.z x.x.x.x being the global address the inside host's local ip address will be translated to. y.y.y.y being the inside host's local ip address z.z.z.z being the outside users ip address. Bob Sites, CCNA System Engineer Valley Health System [EMAIL PROTECTED] Confidentiality Notice: This e-mail message, including any attachments, is for the sole use of the intended recipients and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=52232&t=52232 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]