no partition flash 2 8 8 Marc Russell
""Robert D. Cluett"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > All, > > Am I reading this correctly? Is this stating that I do have 16MB Flash / > 16MB DRAM but need to unpartition the flash? If so, how do I unparitions > Flash Memory? Thanks in advance! > > Kennedy-2502 uptime is 4 minutes > System restarted by power-on > System image file is "flash:2:c2500-d-l.112-9", booted via flash > > cisco 2500 (68030) processor (revision L) with 14336K/2048K bytes of memory. > Processor board ID 06992214, with hardware revision 00000000 > Bridging software. > X.25 software, Version 2.0, NET2, BFE and GOSIP compliant. > 1 Token Ring/IEEE 802.5 interface(s) > 2 Serial network interface(s) > 32K bytes of non-volatile configuration memory. > 8192K bytes of processor board System flash partition 1 (Read/Write) > 8192K bytes of processor board System flash partition 2 (Read/Write) > > Cluett Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=52348&t=52097 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]