Hi all
I ve got a problem The user is getting disconnect after 2-3 minutes, I ve changed the line at both side, Doesn't help, it was working b4 a month no configuration has been changed Anyone knows about this error? 8589934592d8589934592h: Call Handle failed for Modem 2/1 Also this one 0 2002-08-31 14:20:45 Local7.Debug 192.168.10.13 1924: 2d06h: TTY66: Async Int reset: Dropping DTR 2002-08-31 14:20:45 Local7.Debug 192.168.10.13 1925: 2d06h: Modem 2/1 Mcom: in modem state 'Disconnecting' 2002-08-31 14:20:45 Local7.Debug 192.168.10.13 1926: 2d06h: Modem 2/1 Mcom: DISCONNECT, duration = 00:02:01, reason (0x9) DTR Drop 2d07h: Modem 2/1 Mcom: in modem state 'Dialing/Answering' 2d07h: Modem 2/1 Mcom: in modem state 'Incoming ring' 2d07h: %LINK-3-UPDOWN: Interface BRI1/2:1, changed state to up 2d07h: Modem 2/1 Mcom: in modem state 'Waiting for Carrier' 2d07h: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI1/2:1, o up 2d07h: %ISDN-6-CONNECT: Interface BRI1/2:1 is now connected to 0 2d07h: Modem 2/1 Mcom: in modem state 'Connected' 8589934592d8589934592h: Call Handle failed for Modem 2/1 2d07h: Modem 2/1 Mcom: CONNECT at 31200/31200(Tx/Rx), V34, LAPM, 2d07h: TTY66: DSR came up 2d07h: Modem 2/1 Mcom: switching to PPP mode 2d07h: TTY66: no timer type 1 to destroy 2d07h: TTY66: no timer type 0 to destroy 2d07h: tty66: Modem: IDLE->(unknown) 2d07h: %LINK-3-UPDOWN: Interface Async66, changed state to up 2d07h: Modem 2/1 Mcom: PPP escape map: Tx map = FFFFFFFF, Rx map 2d07h: Modem 2/1 Mcom: PPP escape map: Tx map = FFFFFFFF, Rx map 2d07h: TTY66: Async Int reset: Dropping DTR 2d07h: Modem 2/1 Mcom: in modem state 'Disconnecting' 2d07h: Modem 2/1 Mcom: DISCONNECT, duration = 00:00:26, reason ( 2d07h: TTY66: DSR was dropped 2d07h: tty66: Modem: READY->(unknown) 2d07h: TTY66: dropping DTR, hanging up 2d07h: tty66: Modem: HANGUP->(unknown) 2d07h: Modem 2/1 Mcom: in modem state 'Idle' 2d07h: %LINK-5-CHANGED: Interface Async66, changed state to rese 2d07h: TTY66: cleanup pending. Delaying DTR 2d07h: TTY66: cleanup pending. Delaying DTR 2d07h: TTY66: cleanup pending. Delaying DTR 2d07h: Modem 2/1 Mcom: switching to character mode 2d07h: TTY66: no timer type 0 to destroy 2d07h: TTY66: no timer type 1 to destroy 2d07h: TTY66: no timer type 3 to destroy 2d07h: TTY66: no timer type 4 to destroy 2d07h: TTY66: no timer type 2 to destroy 2d07h: Async66: allowing modem_process to continue hangup 2d07h: TTY66: restoring DTR 2d07h: TTY66: autoconfigure probe started 2d07h: %LINK-3-UPDOWN: Interface Async66, changed state to down Best Regards Have A Good Day!! ++++++++++++++++++++++++++++++++++++++++++ Farhan Ahmed MCSE+I, MCP Win2k, CCA, CCDA, CCNA, CSE , CCNP Network Engineer Mideast Data Systems Abu Dhabi Uae. www.mdsemirates.com Tel: 97126274000 Cellular: 971507903578 ++++++++++++++++++++++++++++++++++++++++++ Be a builder, not a destroyer!!! Disclaimer: Privileged/Confidential Information may be contained in this message or Attachments hereto. Please advise immediately if you or your employer do not consent to Internet email for messages of this kind. Errors and Omissions may occur in the contents of this e-mail arising out of or in connection with data transmission, network malfunction or failure, machine or software error, malfunction, or by the person who is sending the email. Mideast Data Systems accepts no responsibility for any such errors or omissions Opinions, Conclusions and other information in this message that do not relate to the Official business of this company shall be understood as neither given nor Endorsed by it. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=52462&t=52462 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
