painful process. I'm more concerned that a technique that I've used successfully many times on these routers suddenly stops working. This is a "by the book" technique that I haven't had problems with before, and is supposed to work.
Given that I have better things to do ( going to the config(boot) mode and working through is pretty time consuming ) The fact that neither RSL or the manual process works correctly tells me this might have more serious ramifications So thanks for the suggestions. this one does work. But I think I'll make Cisco take some responsibility here. Folks will be back to work Tuesday and I'll get the inform I need to pursue this ticket. Chuck -- www.chuckslongroad.info still a work in progress, but on line for your enjoyment z ""Dan Penn"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Did you try booting directly to rommon and erasing the flash manually > first? > > Dan > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of > Chuck's Long Road > Sent: Sunday, September 01, 2002 2:01 PM > To: [EMAIL PROTECTED] > Subject: Router IOS Upgrade bug in 12.1 images [7:52489] > > I've done this before, and it's not like it's real tough, but..... > > I am trying to upgrade my IOS images. Neither the Router Software > Loader, > not the good old copy tftp: flash: is working. > > RSL gives me some odd message > > the copy function never asks if I want to erase the current image on the > flash - it just starts to copy, then stops, with a message that there is > not > enough rook on the destination device. > > sample output of my process: > > Router_7#copy tftp flash: > **** NOTICE **** > Flash load helper v1.0 > This process will accept the copy options and then terminate > the current system image to use the ROM based image for the copy. > Routing functionality will not be available during that time. > If you are logged in via telnet, this connection will terminate. > Users with console access can see the results of the copy operation. > ---- ******** ---- > Proceed? [confirm] > Address or name of remote host []? 192.168.1.49 > Source filename []? c2500-js56i-l.121-5.T10.bin > Destination filename [c2500-js56i-l.121-5.T10.bin]? > > %FR-5-DLCICHANGE: Interface Serial0 - DLCI 201 state changed to DELETED > %FR-5-DLCICHANGE: Interface Serial0 - DLCI 202 state changed to DELETED > %FLH: c2500-js56i-l.121-5.T10.bin from 192.168.1.49 to flash ... > > System flash directory: > File Length Name/status > 1 16294768 c2500-jos56i-l.121-11.bin > [16294832 bytes used, 482384 available, 16777216 total] > Accessing file 'c2500-js56i-l.121-5.T10.bin' on 192.168.1.49... > Loading c2500-js56i-l.from 192.168.1.49 (via Ethernet0): ! [OK] > > %Error: Image size exceeds free space > %FLH: Flash download failed > F3: 16002988+291748+1049272 at 0x3000060 > > As you can see - no asking to erase. I suspect this is a problem with > the > particular image. I had no problem upgrading a different router with a > different image. Unfortunately, just about all my routers have this > identical image in place. > > Anyone seen this? got a fix? > > CCO searches have not been regarding. TAC won't talk to me even though I > work for a major partner. Apparently my management made some procedural > changes, and I can't locate anyone internally who can help me out. They > apparently have lives :-> > > > thanks much > -- > > www.chuckslongroad.info > > still a work in progress, > but on line for your enjoyment Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=52495&t=52489 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]