Hi folks, I wonder if this is possible. I have our Dialin Cisco Router logging to a syslog server. Now the debug output is always in the same format but I was wondering if it can be changed.
Begin paste--------------- 3204: Sep 3 06:37:19: %CALLRECORD-3-MICA_TERSE_CALL_FAILED_REC: DS0 slot/contr/chan=1/0/20, slot/port=0/4, call_id=266, calling=(n/a), called=0837, time=18, finl-state=TRAINUP, disc(modem)=6001 Condition occurred during call setup/Other/host issued SOFTWARE_RESET cmd End paste----------------- As you can see, the calling parameter is (n/a) since we do not have CLI (calling line identification) activated The called number = 0837 which to me is the last four digits of the number that this user dialed. Is it possible to tell the cisco router to put the full number dialled in the log e.g. 555-0837 ? I am also going to ask our telecoms provider to activate CLI so that I can figure out who's dialing our network ... most of them seem to be done in error, but you never know! Thanks Manish Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=52583&t=52583 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]