Kelly, What does the debug of the RIPv2 MD5 error look like? Trying posting it (the debug of the authentication, I mean) to the list, I'm sure someone have seen the error before and can let you know if you've missed anything other than what you might have already covered.
Nigel ----- Original Message ----- From: "Kelly Cobean" To: "ccielab" Sent: Tuesday, September 03, 2002 11:07 PM Subject: RIP v2 authentication > All, > I'm trying to use RIP v2 MD5 authentication and cannot seem to get it to > work. I'm doing one of the FatKid labs and I've matched the RIP > configuration that they list, but I continuously get the "invalid > authentication" message when debugging RIP. I've got version 2 specified on > both routers, and have the "ip rip auth mode md5" and "ip rip auth key test" > commands on the two joining interfaces, and I've got identical key-chains > configured on both routers....Am I missing anything? I've even tried > plain-text authentication and can't make it work. Thanks. > > Kelly Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=52647&t=52647 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]