Hi I agree that there are simulations as well. But, in my BSCI there was just 1 (one) simulation, where I had to configure basic routing on 1 (one) router. If I remember right it was just 1 router command, 2 or 3 network statements, 1 copy run start, finished. OK, I needed quite a lot of time for this, because first I forgot 1 space between a command and a relating number ;-) and unfortunately, the 'router's syntax checker' pointed to a wrong position on the corresponding line...
Regards ""Heffner Christopher"" schrieb im Newsbeitrag [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Also understand that the Routing test not only has IS-IS materials now from > the BSCI course but also now has router simulations on the test too. > > Router simulations are now on the CCNA 640-607, the routing BSCI test and > the BCRAN remote access test. > > Best of luck. > > Christopher M. Heffner > Strategic Network Solutions, Inc. > CCSI, CCIE, MCT, MCSE, MCNI, MCNE, CLI, PCLP, FCSE, CTT, ASE, A+ > Certified Cisco Systems Instructor and Expert (R&S) Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=52747&t=52574 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
