do you have the conduit configured to allow icmp? I think the PIX blocks icmp unless you specifically open a conduit for it. Dain ""mindiani mindiani"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hi I just installed two PIX 501 with vpn tunnel over the internet for my > client and I would like to allow telnet and pdm from one site to the > other. The tunnels are up and I able to send traffic in both directions > but I cannot telnet into the remote Pix from my PC.I tried the following > command: telnet 172.16.1.2 255.255.255.255 outside This command would > not allow my PC (IP address172.16.1.2) to telnet to the remote site but I > am able to telnet to my servers behind the PIX. i have the same problem > with PDM. > > ------------------------------------------------------------------------ > > Join the worlds largest e-mail service with MSN Hotmail. Click Here
Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=52826&t=52826 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]