Hi all I ve got a problem The user is getting disconnect after 2-3 minutes, I ve changed the line at both side, Doesn't help, it was working b4 a month no configuration has been changed Anyone knows about this error? 8589934592d8589934592h: Call Handle failed for Modem 2/1 Also this one 2002-08-31 14:20:45 Local7.Debug 192.168.10.13 1924: 2d06h: TTY66: Async Int reset: Dropping DTR 2002-08-31 14:20:45 Local7.Debug 192.168.10.13 1925: 2d06h: Modem 2/1 Mcom: in modem state 'Disconnecting' 2002-08-31 14:20:45 Local7.Debug 192.168.10.13 1926: 2d06h: Modem 2/1 Mcom: DISCONNECT, duration = 00:02:01, reason (0x9) DTR Drop
> 2d07h: Modem 2/1 Mcom: in modem state 'Dialing/Answering' > 2d07h: Modem 2/1 Mcom: in modem state 'Incoming ring' > 2d07h: %LINK-3-UPDOWN: Interface BRI1/2:1, changed state to up > 2d07h: Modem 2/1 Mcom: in modem state 'Waiting for Carrier' > 2d07h: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI1/2:1, o up > 2d07h: %ISDN-6-CONNECT: Interface BRI1/2:1 is now connected to 0 > 2d07h: Modem 2/1 Mcom: in modem state 'Connected' > 8589934592d8589934592h: Call Handle failed for Modem 2/1 > 2d07h: Modem 2/1 Mcom: CONNECT at 31200/31200(Tx/Rx), V34, LAPM, > 2d07h: TTY66: DSR came up > 2d07h: Modem 2/1 Mcom: switching to PPP mode > 2d07h: TTY66: no timer type 1 to destroy > 2d07h: TTY66: no timer type 0 to destroy > 2d07h: tty66: Modem: IDLE->(unknown) > 2d07h: %LINK-3-UPDOWN: Interface Async66, changed state to up > 2d07h: Modem 2/1 Mcom: PPP escape map: Tx map = FFFFFFFF, Rx map > 2d07h: Modem 2/1 Mcom: PPP escape map: Tx map = FFFFFFFF, Rx map > 2d07h: TTY66: Async Int reset: Dropping DTR > 2d07h: Modem 2/1 Mcom: in modem state 'Disconnecting' > 2d07h: Modem 2/1 Mcom: DISCONNECT, duration = 00:00:26, reason ( > 2d07h: TTY66: DSR was dropped > 2d07h: tty66: Modem: READY->(unknown) > 2d07h: TTY66: dropping DTR, hanging up > 2d07h: tty66: Modem: HANGUP->(unknown) > 2d07h: Modem 2/1 Mcom: in modem state 'Idle' > 2d07h: %LINK-5-CHANGED: Interface Async66, changed state to rese > 2d07h: TTY66: cleanup pending. Delaying DTR > 2d07h: TTY66: cleanup pending. Delaying DTR > 2d07h: TTY66: cleanup pending. Delaying DTR > 2d07h: Modem 2/1 Mcom: switching to character mode > 2d07h: TTY66: no timer type 0 to destroy > 2d07h: TTY66: no timer type 1 to destroy > 2d07h: TTY66: no timer type 3 to destroy > 2d07h: TTY66: no timer type 4 to destroy > 2d07h: TTY66: no timer type 2 to destroy > 2d07h: Async66: allowing modem_process to continue hangup > 2d07h: TTY66: restoring DTR > 2d07h: TTY66: autoconfigure probe started > 2d07h: %LINK-3-UPDOWN: Interface Async66, changed state to down Best Regards Have A Good Day!! ++++++++++++++++++++++++++++++++++++++++++ Farhan Ahmed MCSE+I, MCP Win2k, CCA, CCDA, CCNA, CSE , CCNP Network Engineer Mideast Data Systems Abu Dhabi Uae. www.mdsemirates.com Tel: 97126274000 Cellular: 971507903578 ++++++++++++++++++++++++++++++++++++++++++ Be a builder, not a destroyer!!! Disclaimer: Privileged/Confidential Information may be contained in this message or Attachments hereto. Please advise immediately if you or your employer do not consent to Internet email for messages of this kind. Errors and Omissions may occur in the contents of this e-mail arising out of or in connection with data transmission, network malfunction or failure, machine or software error, malfunction, or by the person who is sending the email. Mideast Data Systems accepts no responsibility for any such errors or omissions Opinions, Conclusions and other information in this message that do not relate to the Official business of this company shall be understood as neither given nor Endorsed by it. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=52849&t=52849 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
