Quick question - where does traffic shaping fit into all this. If I do traffic shaping on outbound traffic from a 3640, I presume that occurs AFTER the classification (ie, the shaping is the last step)?
Richard Larkin -----Original Message----- From: Tom Scott [mailto:[EMAIL PROTECTED]] Sent: Tuesday, 10 September 2002 9:32 AM To: [EMAIL PROTECTED] Subject: tr: QOS ?? help needed [7:52961] Andy, This is a problem for Q Man! (whoever and wherever he is) But seriously, maybe we could work this one out on the list. May I suggest that you use the "modular QoS CLI". This involves three steps: First, classify the packets using ACLs and the class-map command. Second, apply actions to the class using the policy-map command. Third, attach the policy to an interface (input or output). Fourth, enjoy your network. Anyone else want to take it from there? -- TT -------- Original Message -------- Subject: QOS ?? help needed [7:52961] Date: 10 Sep 2002 00:17:37 -0000 From: [EMAIL PROTECTED] ("crow") Organization: GroupStudy.com Discussion Groups Newsgroups: groupstudy.cisco Hi Group, i am having problems to solve the following scenario. kabelmodem - (E0)router2501(E1) - witch - win2k-pro (private address range) ( internetaddress ) ( using - win2k-server (private address range) i want to prefer udp-packets with port xxx over all other traffic (specially http) (leaving the win2k-pro in direction to kabel-modem, with all other traffic i mean traffic from win2k-pro and win2k-server, specially http) is this possible? i tried priority-queueing: priority-list 1 protocol ip high list 120 priority-list 1 protocol ip normal priority-list 1 protocol ip low tcp www access-list 120 permit udp host 10.0.0.2 any range xxxx xxxx int e 0 priority-group 1 but the result wasn' t efficient. also i tried route-maps with precedence flash-override as high and routine as low, but i dont know whether it is the right way solving the prob nor the configuration works. i was searching on the cco and trying to solve the problem for many hours. i need your help. any suggestions? Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=53078&t=52961 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
