Folks I need a quick solution to do the following. It probably is a tough one for most folks here, but any suggestions/assistance will be appreciated. Please send replay to [EMAIL PROTECTED] Basically I need a relay agent that monitors POP3 server and pulls all messages and redirect to IMAP servers(Excange 2000). Here is what I have..
Scenario: Avaya Intuity Audix POP3 server receives fax messages and stores them in POP3 mailboxes. These POP3 accounts need to be forwarded to an exchange server to be accessed via Outlook XP and/or OWA. The 750 DID numbers point to 750 POP3 accounts within the Intuity. The Intuity is not capable of forwarding email to a different address. The users will access email via Outlook XP and OWA and want all mail in a single mailbox. The Intuity was in place, paid for and working prior to this project, therefore less expensive than installing an additional BisCon type fax server. Hypothetical Solution: The hope is for a relay/gateway device which will routinely login to the POP3 server for each of the 750 accounts and forward the messages to the 750 exchange accounts. Future Administration: Because the PBX's DID numbers will be permanently mapped to the Intuity POP3 accounts, the administration would therefore be in adjusting the "forwards" within the relay/gateway to send to the new user's email account as things change. Note: The exchange 2000 server is located across a WAN. The 750 users are on brand new PCs which are being installed now (150 out of 750 completed). Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=53200&t=53200 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
