Yeah, I figured it out and feel foolish. The answer was too obvious for me to see right away. Of course you always figure it out after you send your plea for help out to the public
Kevin ""Daniel Cotts"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Do you have "ip subnet-zero" in your config? > > > -----Original Message----- > > From: Sparky Nelson [mailto:[EMAIL PROTECTED]] > > Sent: Thursday, September 12, 2002 1:39 PM > > To: [EMAIL PROTECTED] > > Subject: RSM issues = Bad subnet mask [7:53216] > > > > > > I am trying to configure an RSM with the addressing scheme > > subnetted with a > > /27 subnet mask, however I am getting the folowing utput. I > > am pretty sure > > that the address is valid and cannot figure out why the RSM > > is punking out. > > Any help would be appreciated. > > > > RSM(config)#ip routing > > RSM(config)#int vlan1 > > RSM(config-if)#ip address 192.168.2.1 255.255.255.224 > > Bad mask /27 for address 192.168.2.1 > > RSM(config-if)# > > > > Kevin Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=53220&t=53216 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
