I have a 5505 with supIII cards in my lab. i wont be back in the office until Monday but if you want, I can swap flash cards with you. I can send you a flash card with a valid image on it and you can send me your blank one. or you can drive down if you want probably about 2 hours or so to Bridgeport, CT.
Dennis ----- Original Message ----- From: "Cisco Kid" To: Cc: Sent: Wednesday, September 11, 2002 1:48 PM Subject: Help Needed to recover 5500 with bad software in New England > ** High Priority ** > > > > I have a Catalyst 5500 with a sup III for my home lab. Some how the software > became corrupted. It now only boots into rommon. The two versions of software > in the boot flash don't work. I have Rommon ver 3.2 so no I can't x-modem or > tftp. The only way to recovery is to be able to copy the OS on to a flash card > I bought. I have the software. Is there any one that can help me? I can use > any of the routers or switches listed below. It will only take 5 minutes to do > this. I am unemployed so I cant afford to buy another supervisor. I live in > Providence, RI and I will pretty much travel to get this fixed. > > Thanks, > > Robert Hosford > > p.s. please reply to [EMAIL PROTECTED] > > > Filesystem Class "C"AS5800 Dial Shelf Controller Catalyst 5000/5500 > Supervisor III Module Catalyst 6000/6500 Supervisor Engine I Catalyst > 6000/6500 Supervisor Engine II Cisco 7000 Route Processor Cisco 7100 Series > Routers Cisco uBR7100 Series Routers Cisco 7200 Series Network Processing > Engine Cisco uBR7200 Series Routers Cisco 7200VXR Series Network Services > Engine 1 Cisco 7600 Series Internet Routers Cisco 10000 Series Routers (ESR) > Cisco uBR10000 Series Routers Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=53227&t=53227 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]