I had the same issue only that I was upgrading form 8mb flash to 16mb. After about an hour of research on the issue I found that I needed to upgrade the Bootrom. I currently have the old which is 10.2(5), I think, and I ordered the upgrade which is 11.something.
""Leonardo Rocha"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > People, > > Any advise for my problem is welcome : > > I have an 2501 with a 4MB DRAM module that works fine. Yesterday, I got 3 > differents 8MB DRAM modules and I tried to upgrade it, but when it boots, it > shows me only 4MB DRAM. > I tried change the first module but, the other two gave me the same symptom. > Anyone know something to help me? > > thanks a lot, > > leo Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=53581&t=53528 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
