one last thing to note, is that mixed mode nm's (ie: have both wan and lan capabilities) are NOT supported on the 2600's
-----Original Message----- From: Ian Henderson [mailto:[EMAIL PROTECTED]] Sent: Thursday, September 19, 2002 11:18 PM To: Steve Boer Cc: [EMAIL PROTECTED] Subject: RE: Please help!!! [7:53664] On Fri, 20 Sep 2002, Steve Boer wrote: > 1e2w's would be for use in 3600 series routers, and are NOT compatible in > 2600's. They include 1 ethernet port and 2 wic slots. In these WIC slots, > you can use any of the wics that are out there (wic-1t wic-1dsu-t1 wic-1b, > etc etc), but are blank until populated with modules. Note that not all WICs work in the older NM's. For example, to use a WIC-1ADSL in an NM, it must be a model that has a FastEthernet port (newer revision, provides the voltage the aDSL card needs). Rgds, - I. -- Ian Henderson CCNA, CCNP Senior Network Engineer, Chime Communications Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=53680&t=53664 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]