All, I want to configure a special priviledge level for our NOC in all our cisco devices to basically have all commands except config. Looking at cco, if you allow sh run at any priv level other than , the user will only be able to see the commands they can configure which defeats the purpose. Anyone know a way around this - so the NOC can have say a level 14 access and be able to see the entire running-config without being able to configure anything?
thx Adam Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=53723&t=53723 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]