Hi All, Building the config for a 3524xl with inline power for a branch site that is getting NEC IP Phones this week. The scene is that, we have a single subnet in the branch consisting of 16 PC's, and we have just taken delivery of the 16 IP Phones. I have limited VOIP experience, however I have come up with this config: I have a single VLAN for both voice and data (maybe a poor way of distinguishing between phone and PC). I have: Interface fastethernet 0/1 Power inline auto Speed 100 Duplex full Spanning tree portfast Native vlan 1 Voice vlan dot1p Is this a basic working config for VOIP on a single switch, using a single subnet ? Thanks all for your time Ps: Any one got time to design a server room ? A long story, one that Chuck would enjoy about pen pushers designing comms rooms.
********************************************************************** visit http://www.solution6.com UK Customers - http://www.solution6.co.uk ********************************************************************* This email message (and attachments) may contain information that is confidential to Solution 6. If you are not the intended recipient you cannot use, distribute or copy the message or attachments. In such a case, please notify the sender by return email immediately and erase all copies of the message and attachments. Opinions, conclusions and other information in this message and attachments that do not relate to the official business of Solution 6 are neither given nor endorsed by it. ********************************************************************* Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=53788&t=53788 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
