I have an OC3 ATM WAN link that connect two LANs, but there are two
identical subnets /30 on either side of the WAN link. Has any one ever had
that type of setup and how is that possible with two identical public IP /30
subnets on either side of WAN connection?

Here are the interfaces on either side of the wan

AAAV7204#sh int fastEthernet 1/0
FastEthernet1/0 is up, line protocol is up 
  Hardware is DEC21140A, address is 0003.6cce.f01c (bia 0003.6cce.f01c)
  Description: FE from PM to WDGB
  Internet address is 205.109.29.10/30
  MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec, 
     reliability 255/255, txload 1/255, rxload 2/255
  Encapsulation ARPA, loopback not set
  Keepalive set (10 sec)
  Full-duplex, 100Mb/s, 100BaseTX/FX
  ARP type: ARPA, ARP Timeout 04:00:00
  Last input 00:00:21, output 00:00:00, output hang never
  Last clearing of "show interface" counters never
  Input queue: 0/75/4/0 (size/max/drops/flushes); Total output drops: 0
  Queueing strategy: fifo
  Output queue :0/40 (size/max)
  5 minute input rate 814000 bits/sec, 113 packets/sec
  5 minute output rate 81000 bits/sec, 79 packets/sec
     441800484 packets input, 1055724299 bytes
     Received 713 broadcasts, 0 runts, 0 giants, 2 throttles
     0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
     0 watchdog
     0 input packets with dribble condition detected
     349363988 packets output, 1452170449 bytes, 0 underruns

AAAV7206#sh ip int fastEthernet 1/0
FastEthernet1/0 is up, line protocol is up
  Internet address is 205.109.29.9/30
  Broadcast address is 255.255.255.255
  Address determined by non-volatile memory
  MTU is 1500 bytes
  Helper address is not set
  Directed broadcast forwarding is disabled
  Outgoing access list is not set
  Inbound  access list is not set
  Proxy ARP is enabled
  Security level is default
  Split horizon is enabled
  ICMP redirects are always sent
  ICMP unreachables are always sent
  ICMP mask replies are never sent
  IP fast switching is enabled
  IP fast switching on the same interface is disabled
  IP Flow switching is disabled
  IP CEF switching is enabled
  IP Fast switching turbo vecto

Thank you,
Randy


Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=53973&t=53973
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to