You may want to check if your link led is on and if you can ping the inside interface also the ip of the laptop needs to be defined using the telnet command.
-----Original Message----- From: Naomi James [mailto:[EMAIL PROTECTED]] Sent: Tuesday, September 24, 2002 9:02 AM To: [EMAIL PROTECTED] Subject: PIX [7:53955] I have a PIX 525 and I am doing the initial configuration. I am trying to telnet to it to load the 6.2 version. I have my laptop directly connect to the inside interface via a CAT 5 cable. The inside interface and my laptop are on the same network. I also have the telnet command in the configuration. I am not able to telnet to the PIX. Can anyone help? Naomi James Computer Services and Information Technology Savannah State University 912-356-2509 [GroupStudy.com removed an attachment of type image/gif which had a name of Mabelt.gif] [GroupStudy.com removed an attachment of type image/gif which had a name of Mabelb.gif] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=53987&t=53955 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
