It should work, send a "sh interface" off of the 6509. Dave
Abbas Ali wrote: > > I have a 6509 connected to another 6509 and also connectedto (2) 4006 > switches. I have 3 Vlans and one 1 vlan specificallyfor the Management. > The managment subnet is 10.0.1.0. One ofthe 6509s is acting as a root > switch as well as also doing Intervlanrouting. Here is the issue I haveFrom > the Managment Vlan, I have assigned 10.0.1.1 to the router blade,10.0.1.2 to > the the root 6509 SC0 interface, 10.0.1.3 to another 6509 SC0interface, > 10.0.1.4 to the first 4006 switch and the 10.0.1.5 to the 2nd 4006switch. > On a root 6509 switch I have also assigned the default route tothe switches > router itself. For exampel 0.0.0.0 to 10.0.1.1. I can ping thisaddress > 10.0.1.1 from any host, but not able to ping this address from theswitch > mode itself. Everything is working, but I am just curious why I can't > pingthe address of the router blade from the SC0 interface itself.Regards,Ali > > ------------------------------------------------ > Changed your e-mail? Keep your contacts! Use this free e-mail change of > address service from Return Path. Register now! -- David Madland CCIE# 2016 Sr. Network Engineer Qwest Communications 612-664-3367 "You don't make the poor richer by making the rich poorer." --Winston Churchill Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=54058&t=54008 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
