Just signed up to this list so forgive me if this has been said already. On your Cisco I dont see where you have created a username and password. It should look like this:
Example: username test password cisco The username is typically the hostname of the router you want to connect to. So the remote router will have your routers name as the username. Of course the password needs to be the same on both sides. Give that a try and let me know. Thanks, Mario Puras SoluNet Technical Support -----Original Message----- From: Arni V. Skarphedinsson [mailto:[EMAIL PROTECTED]] Sent: Wednesday, September 25, 2002 6:12 AM To: [EMAIL PROTECTED] Subject: PPP authentication problem [7:54047] I am having problems with a ISDN router calling into an ISP, the CHAP authentication is not sending the correct username. the debug i get PPP BRI0:1: CHAP challenge from 3640 00:10:21: PPP BRI0:1: USERNAME 3640: lookup failure. 00:10:21: PPP BRI0:1: Unable to authenticate for peer. it always tries to use the remote router hostname as the username 3640, but the username I am trying to use is somthing compleatly difrent is is a part of my confing interface Dialer0 ip unnumbered Ethernet0 encapsulation ppp dialer remote-name 3640 dialer string 5123456 dialer pool 1 dialer-group 1 no cdp enable ppp authentication chap ppp chap hostname li5h31 ppp chap password 7 045358571B3259 any thoughts ??? best regards, Arni V. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=54071&t=54047 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
