However, wanting to use more than one bri with dialer profiles I found I need to use a loopback, and ip unnumbered lo in the dialer profile (tested with 12.2). Anybody found out why ? Where is this documented ? I suppose I'll find that in the standard documentation but haven't been able to find it yet :(
Heiko -- -- PREVINET S.p.A. [EMAIL PROTECTED] -- Via Ferretto, 1 ph x39-041-5907073 -- I-31021 Mogliano V.to (TV) fax x39-041-5907472 -- ITALY > -----Original Message----- > From: Mohannad Khuffash [mailto:[EMAIL PROTECTED]] > Sent: Wednesday, August 28, 2002 1:07 PM > To: [EMAIL PROTECTED] > Subject: Re: 128Kbps instead 64kbpes [7:52190] > > > In addition to dialer-load threshold, enable multilink > support by using > PPP multilink Command > > Mohannad > ""Steven A. Ridder"" wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > dialer-load threshold 1either > > > > -- > > > > RFC 1149 Compliant. > > > > > > > > ""Eng. ABDALLAH QUQAS"" wrote in message > > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > > Dear ALL, > > > > > > how i can make ISDN BRI to connect at 128kbps instead of > 64kbps as a > > bundle > > > channel of Cisco router 3600 using ppp encapsulation. > > > > > > Kind Regards > > > abd quqas Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=54232&t=52190 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]