Shane Green wrote:
> I was wondering if any one could explain this error "Bad memory -
> wrote zero, read 0x04000000 at location 0x00000010 "
Probably means what it says: bad memory.
Try swapping out the RAM SIMM and see if it goes away. If you're unlucky
and you have one of the older 2500s with 2M soldered on the mainboard,
you may be SOL, as it looks like the error is very low in the memory
map, where the fixed 2M ends up, IIRC.
Regards,
Marco.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=54283&t=54281
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
