Hi.. Some users complaint to me that their application getting
disconnection. I have fixed the speed and duplex of their switch port at
both sides and changed the cable but still the same. And the strange thing
is that all the problem ports are all having the same error pattern-same
number of input errors and CRC. The rest of errors are all zero-as shown
below. Those other ports that have different number input errors and CRC
are not having disconnection problem. Any idea what can I do on those
ports that having disconnection problem?
SW4>sh int fas0/21
FastEthernet0/21 is up, line protocol is up
Hardware is Fast Ethernet, address is 00d0.790c.d315 (bia 00d0.790c.d315)
MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive not set
Full-duplex, 100Mb/s, 100BaseTX/FX
ARP type: ARPA, ARP Timeout 04:00:00
Last input never, output 00:00:00, output hang never
Last clearing of "show interface" counters 5d21h
Queueing strategy: fifo
Output queue 0/40, 0 drops; input queue 0/75, 0 drops
5 minute input rate 2000 bits/sec, 5 packets/sec
5 minute output rate 52000 bits/sec, 23 packets/sec
2859951 packets input, 283856132 bytes
Received 213447 broadcasts, 0 runts, 0 giants, 0 throttles
152 input errors, 152 CRC, 0 frame, 0 overrun, 0 ignored
0 watchdog, 0 multicast
0 input packets with dribble condition detected
8585472 packets output, 2364752071 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier
0 output buffer failures, 0 output buffers swapped out
Cat29-L7-4>
==================================================================
De informatie opgenomen in dit bericht kan vertrouwelijk zijn en
is uitsluitend bestemd voor de geadresseerde. Indien u dit bericht
onterecht ontvangt wordt u verzocht de inhoud niet te gebruiken en
de afzender direct te informeren door het bericht te retourneren.
==================================================================
The information contained in this message may be confidential
and is intended to be exclusively for the addressee. Should you
receive this message unintentionally, please do not use the contents
herein and notify the sender immediately by return e-mail.
==================================================================
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=54516&t=54516
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
