Afternoon I was wondering if anyone could shed any light on the following problem. In the topology below: Router2 and router3 who are connected via switch 1 and switch 2 have lost their eigrp neighbour relationship. Router1 and router2 still have a eigrp relationship and router4 and router3 still have a their eigrp neighbour relationship. The configurations on sw1 and sw2 have not been changed. I have rebooted r2 and r3 but the neighbour relationships have not been re-established???? Any ideas as to what the problem could be.
router1 (Production) router4 (DR site) (remote site) router2 router3 sw1 sw2 Any advice would be much appreciated. Cheers Gavin Gavin Wilson Kleinwort Benson Private Bank Tel: 0207 4751771 Mobile: 07989441850 email: [EMAIL PROTECTED] This email and any files transmitted with it are intended solely for the addressee(s) and may be legally privileged and/or confidential. If you have received this email in error you may not copy, forward or use the contents, attachments or information in any way. Please destroy it and contact the sender via our switchboard on +44(0) 20 7475 6600 or via return email. Any unauthorised use or disclosure may be unlawful. Kleinwort Benson Private Bank give no warranty as to the accuracy or completeness of this email after it is sent over the Internet and accept no responsibility for change made after it was sent. Any opinions expressed in this email may be personal to the author and may not necessarily reflect the opinions of Dresdner Bank or its affiliates. They may also be subject to change without notice. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=54624&t=54624 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]