Thanks mate, I will put that config on my managers port this afternoon and have a go at it.
-----Original Message----- From: Vance Krier [mailto:[EMAIL PROTECTED]] Sent: Thursday, October 03, 2002 5:07 PM To: [EMAIL PROTECTED] Subject: Re: Need to make an access port very slow on a 2950 [7:54764] Hey John, One thing that comes to mind is rate-limiting. Do you have L3? Maybe you could create a new vlan (to make all traffic go through the L3 device) with a new subnet and drop that port/pc into that vlan. Then setup an access-list and rate limit commands to throttle that traffic to 9600. Something like this: access-list rate-limit 110 interface rate-limit input access-group rate-limit 110 9600 0 0 conform-action transmit exceed-action drop rate-limit output access-group rate-limit 110 9600 0 0 conform-action transmit exceed-action drop Good luck, Vance ""John Brandis"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hi All, > > Without going into it to much, I really would like to set some type of > policy where by a user's PC on port 5 of my 2950 switch, has access to > the rest of the LAN at 9.6kb/s..Can this be done on the switch, or do > I need to > do this on my 4006 ? > > John > Sydney Australia > > > ********************************************************************** > > visit http://www.solution6.com > > UK Customers - http://www.solution6.co.uk > > ********************************************************************* > This email message (and attachments) may contain information that is > confidential to Solution 6. If you are not the intended recipient you cannot > use, distribute or copy the message or attachments. In such a case, please > notify the sender by return email immediately and erase all copies of > the message and attachments. Opinions, conclusions and other > information in this message and attachments that do not relate to the > official business of > Solution 6 are neither given nor endorsed by it. > ********************************************************************* Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=54835&t=54764 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]