Hi...
Recently we found that LAN is getting slower and I used Fluke One Touch Network Assistant to check the health of network. And it gave me the following. Utilization 1% Error 0 % Collision 0% Broadcast 80 % IP 48% Station >250 % Do you think the fluke output indicate that our network got problem? The broadcast portion is quite high and I tried to find out which pc contribute to the broadcast, it gave me PC-A 6% PC-B 6& PC-C 6% PC-D 6% PC-E 6% PC-F 6% PC-G 6% PC-H 6% PC-I 6% All the PC that listed are installed with RCS software, when we uninstalled RCS from the PC, the PC's broadcast will be gone. Why RCS caused the broadcast, I am not sure whether it is the cause of our network slowness or not. Any idea? Thanks in advanced Sim ================================================================== De informatie opgenomen in dit bericht kan vertrouwelijk zijn en is uitsluitend bestemd voor de geadresseerde. Indien u dit bericht onterecht ontvangt wordt u verzocht de inhoud niet te gebruiken en de afzender direct te informeren door het bericht te retourneren. ================================================================== The information contained in this message may be confidential and is intended to be exclusively for the addressee. Should you receive this message unintentionally, please do not use the contents herein and notify the sender immediately by return e-mail. ================================================================== Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=54860&t=54860 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]