On 6509, you could use 'set security acl ... mac' The problem is that works only for traffic other than IP/IPX.
For IP you should use 'set security acl ip ...' Regards, Alaerte "r34rv13wm1rr0r" @groupstudy.com em 04/10/2002 13:03:31 Favor responder a "r34rv13wm1rr0r" Enviado Por: [EMAIL PROTECTED] Para: [EMAIL PROTECTED] cc: Assunto: Switch MAC filter [7:54880] Is there a way on a 6509 to filter a port from seeing a traffic from a cetain MAC when the two hosts are on the same VLAN. The problem is one host keeps broadcasting NTP updates every 40 secs and the Pix SYSLOG is contantly logging it. Since the NTP host does not go through the firewall I was wondering if I could block the MAC address all together at the port the Pix is plugged into. Thanks...... Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=54899&t=54880 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]