10/5/2002 9:50pm Saturday
I would like to connect the ATM blade on my Catalyst 5505 to a Marconi/FORE ASX-200WG Can anyone guide me thru setting it up ? RLP_5505 (enable) sho module Mod Slot Ports Module-Type Model Sub Status --- ---- ----- ------------------------- ------------------- --- -------- 1 1 2 1000BaseX Supervisor IIIG WS-X5550 no ok 2 2 2 MM OC-3 Dual-Phy ATM WS-X5158 no ok 3 3 24 10/100BaseTX Ethernet WS-X5224 no ok 4 4 24 10/100BaseTX Ethernet WS-X5224 no ok 5 5 24 10/100BaseTX Ethernet WS-X5224 no ok Mod MAC-Address(es) Hw Fw Sw --- -------------------------------------- ------ ---------- --------------- -- 1 00-90-bf-23-ac-00 to 00-90-bf-23-af-ff 1.2 5.1(1) 6.3(9) 2 00-10-7b-42-b3-d6 2.1 1.3 12.0(22)W5(25) 3 00-10-7b-49-07-20 to 00-10-7b-49-07-37 1.4 3.1(1) 6.3(9) 4 00-10-7b-94-fb-30 to 00-10-7b-94-fb-47 1.4 3.1(1) 6.3(9) 5 00-10-7b-94-fc-20 to 00-10-7b-94-fc-37 1.4 3.1(1) 6.3(9) RLP_5505 (enable) Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=54948&t=54948 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
