RE: IOS Port range command [7:55139]

[Frank Merrill]

> I did this on a 3550-24:
> 
> Switch(config)#int range f0/1 -24
> Switch(config-if-range)#no shut
> Switch(config-if-range)#
> 1w0d: %LINEPROTO-5-UPDOWN: Line protocol on Interface
> FastEthernet0/1,
> changed state to down
> 1w0d: %LINEPROTO-5-UPDOWN: Line protocol on Interface
> FastEthernet0/2,
> changed state to down
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]