If I have multiple VLANS for example 10,20,30 on 1st, 2nd, and 3rd floors respectivley and VLANS 11,21,31 on 4th, 5th, 6th floors. All of the floor switches are connected to (2) 6509 switches. The server farms have vlans 40 and 50 and hanging off on two seperate switches 3548. Each has its own VLANS. They are also connected to (2) 6509 swithes. 6509s are doing all the routing. Each Vlan is tied to a unique subnet. In order for me to do VLAN Load balancing: I could make (1) 6509 as root bridge for vlans 10, 20, and 30 and secondary root bridge for VLANS 11,21,31 and vice versa for(2) 6509 as a root bridge for vlans 11,21,31 and secondary root bridge for vlans 10,20, and 30. When I do the set commands, for example on (1) 6509, I would do "SET SPANTREE PRIORITY 100 10 20 30""SET SPANTREE PRIORITY 200 11,21, 31" On (2) 6509, "SET SPANTREE PRIORITY 100 11,21, 31""SET SPANTREE PRIORITY 200 10,20,30" The question was do I also need to include VLANS 40 and 50 (The server farm VLANS) in those above commands. Regards, Teza
------------------------------------------------ Join Excite! - http://www.excite.com The most personalized portal on the Web! Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=55411&t=55411 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
