Here are some hints, 1- There must be static or global statements to allow the address translation. 2- You need access list or conduit statement to allow icmp in and out. 3- Use the debug tools to see what the problem is by issuing this command - debug icmp trace then try to ping to outside - you should see on the console the result of your ping which should tell you what is wrong and help you debug the problem . 4- You could also turn logging on and view the traffic. Without logs it will be difficult to pin point the problem.
Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=55533&t=55470 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]