If (5) 3550 Catalyst Switches are configured in a Stack, the last swtich will always connect to the first switchin order to complete the loop. Am I Correct? In stack configruation, is it still required to assign five management IP addresses to maintainthe switches or just one management IP address will be able to control the whole switch. In orderto configure the ports, then I would assume that one terminal or telnet session will show the total portsof five switches. Teza
_______________________________________________ Join Excite! - http://www.excite.com The most personalized portal on the Web! Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=56053&t=56053 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]